Sodium Hydroxide Solution 0,25 Mol/Lt 1 Lt (Sodyum Hidroksit Çözeltisi)

Sodium Hydroxide Solution 0,25 Mol/Lt 1 Lt (Sodyum Hidroksit Çözeltisi)

Kategori
Analitik Kimyasallar
Marka
Merck
Stok Kodu
109139.1000
Teklif İste
*
*
*
*
3 Günde Kargoda
Stok Sorunuz
Paylaş:
Ürün Bilgisi
Ürün Bilgisi
Sodium Hydroxide Solution 0,25 Mol/Lt  1 Lt (Sodyum Hidroksit Çözeltisi)
 
Description
Catalogue Number 109139
Product Information
HS Code 2815 12 00
Quality Level
Physicochemical Information
Density 1.01 g/cm3 (20 °C)
pH value 13.5 (H₂O, 20 °C)
Safety Information according to GHS
Hazard Pictogram(s) Hazard Pictogram(s)
Hazard Statement(s) H290: May be corrosive to metals.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
Precautionary Statement(s) P234: Keep only in original packaging.
P264: Wash skin thoroughly after handling.
P280: Wear protective gloves/ eye protection/ face protection.
P302 + P352: IF ON SKIN: Wash with plenty of water.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P332 + P313: If skin irritation occurs: Get medical advice/ attention.
Signal Word Warning
Storage class 8A Combustible, corrosive hazardous materials
WGK NWG not water endangering
Disposal 28
Aqueous solutions: Container D.
Safety Information
Categories of danger irritant
Storage and Shipping Information
Storage Store at +15°C to +25°C.
Transport Information
Declaration (railroad and road) ADR, RID UN 1824 , 8, III
Declaration (transport by air) IATA-DGR UN 1824 , 8, III
Declaration (transport by sea) IMDG-Code UN 1824 , 8, III, Segregation Group: 18 (Alkalis)
Specifications
Form liquid
Amount-of-substance concentration 0.24875 - 0.25125
Measurement uncertainty 0.00075
Traceability NIST SRM
Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025.
The concentration is determined by volumetric titration and refers to 20°C.
The amount-of-substance concentration of this volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 84 potassium hydrogen phthalate) by means of volumetric standard potassium hydrogen phthalate (article number 1.02400), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%.
Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.
Yorumlar
Bu ürüne ilk yorumu siz yapın!
Yorum Yaz
Taksit Seçenekleri
Sodium Hydroxide Solution 0,25 Mol/Lt 1 Lt (Sodyum Hidroksit Çözeltisi) Merck Kimyasallar, Analitik Kimyasallar, Laboratuvar Kimyasalları, İthal Kimyasallar çeşitleri ve daha birçok laboratuvar malzemesi için Tıkla 109139.1000
Sodium Hydroxide Solution 0,25 Mol/Lt 1 Lt (Sodyum Hidroksit Çözeltisi)

Tavsiye Et

*
*
*
pipet ucu kampanyası axygen
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.