Anasayfa
Kimyasallar
Analitik Kimyasallar
Mercury (II) Nitrate Solution C(Hg(No3)2) 0.05Mol/L 1 Lt (Cıva (II) Nitrat Çözeltisi) CAS: 10045-94-0, 7697-37-2

Mercury (II) Nitrate Solution C(Hg(No3)2) 0.05Mol/L 1 Lt (Cıva (II) Nitrat Çözeltisi) CAS: 10045-94-0, 7697-37-2

Mercury (II) Nitrate Solution C(Hg(No3)2) 0.05Mol/L 1 Lt (Cıva (II) Nitrat Çözeltisi) CAS: 10045-94-0, 7697-37-2

Mercury (II) Nitrate Solution C(Hg(No3)2) 0.05Mol/L 1 Lt (Cıva (II) Nitrat Çözeltisi) CAS: 10045-94-0, 7697-37-2

Kategori

Analitik Kimyasallar

Marka

Merck

Stok Kodu

109143.1000

3 Günde Kargoda

Stok Sorunuz

Taksit Seçenekleri

Mercury (II) Nitrate Solution C(Hg(No3)2) 0.05Mol/L 1 Lt (Cıva (II) Nitrat Çözeltisi) CAS: 10045-94-0, 7697-37-2

Description
Catalogue Number	109143
Synonyms	Nota 1 A

Product Information
CAS number	10045-94-0, 7697-37-2
HS Code	2852 10 00
Quality Level

Physicochemical Information
Density	1.02 g/cm3 (20 °C)
pH value	1 (H₂O, 20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H302 + H332: Harmful if swallowed or if inhaled. H311: Toxic in contact with skin. H314: Causes severe skin burns and eye damage. H373: May cause damage to organs through prolonged or repeated exposure. H411: Toxic to aquatic life with long lasting effects.
Precautionary Statement(s)	P273: Avoid release to the environment. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P304 + P340 + P310: IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P314: Get medical advice/ attention if you feel unwell.
Signal Word	Danger
Storage class	6.1B Non-combustible, acute toxic Cat. 1 and 2 / very toxic hazardous materials
WGK	WGK 3 highly hazardous to water
Disposal	20 Mercury residues and salts. Elemental mercury must be taken up with Chemizorb® Hg (Cat. No 112576): container G.

Safety Information
Categories of danger	toxic, dangerous for the environment

Storage and Shipping Information
Storage	Store at +15°C to +25°C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 3289 , 6.1 (8), II
Declaration (transport by air) IATA-DGR	UN 3289 , 6.1 (8), II
Declaration (transport by sea) IMDG-Code	UN 3289 , 6.1 (8), II, Segregation Group: 1 (Acids)7 (Heavy metals and their salts (including their organometallic compounds))11 (Mercury and mercury compounds)

Specifications
Form	liquid
Amount-of-substance concentration	0.04975 - 0.05025
Measurement uncertainty	+/- 0.00015
Traceability	NIST SRM
Accreditation: This volumetric solution is analyzed by our calibration laboratory D-K-15185-01-00 which is accredited according to DIN EN ISO/IEC 17025 for analysis of amount-of-substance concentrations in volumetric solutions by DAkkS (Deutsche Akkreditierungsstelle - German National Accreditation Body). The accreditation certificate can be found at www.sigmaaldrich.com/ISO17025. The concentration is determined by volumetric titration and refers to 20°C. The amount-of-substance concentration of this volumetric solution is determined with standardized thiocyanate solution (article number 1.09079). The thiocyanate solution is standardized by silver nitrate solution (article number 1.09081) which has been standardized against volumetric standard sodium chloride (article number 1.02406). This volumetric solution is traceable to a primary standard reference material (SRM) from the National Institute of Standards and Technology, Gaithersburg, USA (NIST SRM 999 potassium chloride) by means of volumetric standard sodium chloride (article number 1.02406), certified reference material according to ISO 17034, analyzed by our accredited calibration laboratory of Merck KGaA, Darmstadt, Germany according to DIN EN ISO/IEC 17025. The uncertainty is expressed as expanded measurement uncertainty with a coverage factor k=2 covering a confidence level of 95%. Note: The titer is a correction factor to correct for variations of the volumetric solution, the titration equipment, the temperature and other laboratory conditions. For correct titration results it is recommended to determine a titer with the laboratory specific equipment and under laboratory specific conditions directly after opening a new bottle and at regular time intervals.

Bu ürüne ilk yorumu siz yapın!

Taksit Seçenekleri