Anasayfa
Kimyasallar
Analitik Kimyasallar
Asitler
Hydrochloric Acid %25 Gr For Analysis Emsure 2,5 Lt (Analiz İçin Hidroklorik Asit %25) CAS: 7647-01-0

Hydrochloric Acid %25 Gr For Analysis Emsure 2,5 Lt (Analiz İçin Hidroklorik Asit %25) CAS: 7647-01-0

Kategori

Asitler

Marka

Merck

Stok Kodu

100316.2500

Teklif İste

3 Günde Kargoda

Stok Sorunuz

Düşünce Haber Ver

Hydrochloric Acid %25 Gr For Analysis Emsure 2,5 Lt (Analiz İçin Hidroklorik Asit %25) CAS: 7647-01-0

Description
Catalogue Number	100316
Synonyms	Hydrogen chloride solution

Product Information
CAS number	7647-01-0
HS Code	2806 10 00
Quality Level

Physicochemical Information
Boiling point	107 °C (1013 hPa)
Density	1.12 g/cm3 (20 °C)
Melting Point	-52 °C
pH value	<1 (H₂O, 20 °C)
Vapor pressure	12 hPa (20 °C)
Viscosity kinematic	1.73 mm2/s (20 °C)

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H290: May be corrosive to metals. H314: Causes severe skin burns and eye damage. H335: May cause respiratory irritation.
Precautionary Statement(s)	P234: Keep only in original packaging. P261: Avoid breathing dust/ fume/ gas/ mist/ vapours/ spray. P271: Use only outdoors or in a well-ventilated area. P280: Wear protective gloves/ protective clothing/ eye protection/ face protection/ hearing protection. P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Signal Word	Danger
Storage class	8B Non-combustible, corrosive hazardous materials
WGK	WGK 1 slightly hazardous to water
Disposal	12 Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D.

Safety Information
Categories of danger	corrosive

Storage and Shipping Information
Storage	Store at +2°C to +30°C.

Transport Information
Declaration (railroad and road) ADR, RID	UN 1789 , 8, II
Declaration (transport by air) IATA-DGR	UN 1789 , 8, II
Declaration (transport by sea) IMDG-Code	UN 1789 , 8, II, Segregation Group: 1 (Acids)

Specifications
Assay (alkalimetric)	≥ 25.0 %
Color	≤ 10 Hazen
Bromide (Br)	≤ 50 ppm
Free chlorine (Cl)	≤ 0.5 ppm
Sulfate (SO₄)	≤ 1 ppm
Sulfite (SO₃)	≤ 1 ppm
Al (Aluminium)	≤ 0.050 ppm
As (Arsenic)	≤ 0.01 ppm
Ba (Barium)	≤ 0.020 ppm
Be (Beryllium)	≤ 0.020 ppm
Bi (Bismuth)	≤ 0.100 ppm
Ca (Calcium)	≤ 0.500 ppm
Cd (Cadmium)	≤ 0.010 ppm
Co (Cobalt)	≤ 0.010 ppm
Cr (Chromium)	≤ 0.020 ppm
Cu (Copper)	≤ 0.020 ppm
Fe (Iron)	≤ 0.200 ppm
Ge (Germanium)	≤ 0.050 ppm
K (Potassium)	≤ 0.100 ppm
Li (Lithium)	≤ 0.010 ppm
Mg (Magnesium)	≤ 0.100 ppm
Mn (Manganese)	≤ 0.010 ppm
Mo (Molybdenum)	≤ 0.020 ppm
NH₄ (Ammonium)	≤ 1 ppm
Na (Sodium)	≤ 0.500 ppm
Ni (Nickel)	≤ 0.020 ppm
Pb (Lead)	≤ 0.020 ppm
Sr (Strontium)	≤ 0.010 ppm
Ti (Titanium)	≤ 0.100 ppm
Tl (Thallium)	≤ 0.050 ppm
V (Vanadium)	≤ 0.010 ppm
Zn (Zinc)	≤ 0.050 ppm
Zr (Zirconium)	≤ 0.100 ppm
Residue on ignition (as SO₄)	≤ 5 ppm
Minimum shelf life: see product label

Yorumlar

Bu ürüne ilk yorumu siz yapın!

Yorum Yaz

Taksit Seçenekleri

Hydrochloric Acid %25 Gr For Analysis Emsure 2,5 Lt (Analiz İçin Hidroklorik Asit %25) CAS: 7647-01-0

Tavsiye Et