Anasayfa
Kimyasallar
Analitik Kimyasallar
Asitler
CITRIC ACID MONOHYDRATE CRYST. Emprove 5 Kg (Sitrik Asit Monohidrat Kristal) CAS: 5949-29-1

CITRIC ACID MONOHYDRATE CRYST. Emprove 5 Kg (Sitrik Asit Monohidrat Kristal) CAS: 5949-29-1

Kategori

Asitler

Marka

Merck

Stok Kodu

100242.5000

3 Günde Kargoda

Stok Sorunuz

CITRIC ACID MONOHYDRATE CRYST. Emprove 5 Kg (Sitrik Asit Monohidrat Kristal) CAS: 5949-29-1

CAS #: 5949-29-1 EC Number: 201-069-1 Molar Mass: 210.14 g/mol Hill Formula: C₆H₈O₇ * H₂O Grade: Ph Eur,BP,ChP,JP,USP,E 330,FCC

Description
Catalogue Number	100242
Synonyms	2-Hydroxypropane-1,2,3-tricarboxylic acid, Hydroxytricarballylic acid

Physicochemical Information
Density	1.54 g/cm3 (20 °C)
Flash point	173.9 °C Not applicable
Melting Point	135 - 152 °C
pH value	1.85 (50 g/l, H₂O, 25 °C)
Vapor pressure	<1 Pa (25 °C)
Bulk density	800 - 1000 kg/m3
Solubility	880 g/l

Toxicological Information
LD 50 oral	LD50 Rat 3000 mg/kg

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H319: Causes serious eye irritation.
Precautionary Statement(s)	P264: Wash skin thoroughly after handling. P280: Wear eye protection/ face protection. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P337 + P313: If eye irritation persists: Get medical advice/ attention.
Signal Word	Warning
RTECS	GE7810000
Storage class	10 - 13 Other liquids and solids
WGK	WGK 1 slightly hazardous to water
Disposal	3 Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C.

Safety Information
Categories of danger	irritant

Storage and Shipping Information
Storage	Store at +2°C to +30°C.

Transport Information
Declaration (railroad and road) ADR, RID	Kein Gefahrgut
Declaration (transport by air) IATA-DGR	No Dangerous Good
Declaration (transport by sea) IMDG-Code	No Dangerous Good

Specifications
Assay (alkalimetric, calculated on anhydrous substance)	99.5 - 100.5 %
Identity (IR-spectrum)	passes test
Identity (wet chemistry)	passes test
Appearance	white to almost white or colorless crystals
Appearance of solution (200 g/l; water)	clear (≤ 1.5 NTU) and not more intense in color than reference solution Y₇, BY₇ or GY₇
Chloride (Cl)	≤ 5 ppm
Sulfate (SO₄)	≤ 50 ppm
Heavy metals (as Pb)	≤ 5 ppm
Al (Aluminium)	≤ 0.2 ppm
As (Arsenic)	≤ 1 ppm
Ca (Calcium)	passes test
Fe (Iron)	≤ 10 ppm
Hg (Mercury)	≤ 1 ppm
Pb (Lead)	≤ 0.5 ppm
Oxalates (as C₂H₂O₄)	≤ 100 ppm
Oxalate (C₂H₂O₄) (ChP)	passes test
Residual solvents (ICH (Q3C))	excluded by manufacturing process
Readily carbonisable substance	passes test
Sulfated ash (600 °C)	≤ 0.05 %
Water (according to Karl Fischer)	7.5 - 8.8 %
Bacterial endotoxins	< 0.5
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental Impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*).
Corresponds to Ph. Eur., BP, ChP, JP, USP, E 330, FCC Conforms to the purity criteria on food additives according to the current European Commission Regulation.

Bu ürüne ilk yorumu siz yapın!