Physicochemical Information
Boiling point	249 °C (1013 hPa)
Density	1.26 g/cm3 (15 °C)
Flash point	121 °C
Ignition temperature	570 °C
Melting Point	122.4 °C
pH value	2.8 (H₂O, 25 °C) (saturated solution)
Vapor pressure	0.001 hPa (20 °C)
Bulk density	500 kg/m3
Solubility	2.9 g/l

Toxicological Information
LD 50 oral	LD50 Rat 1700 mg/kg
LD 50 dermal	LD50 Rabbit > 5000 mg/kg

Safety Information according to GHS
Hazard Pictogram(s)
Hazard Statement(s)	H315: Causes skin irritation. H318: Causes serious eye damage. H372: Causes damage to organs through prolonged or repeated exposure if inhaled.
Precautionary Statement(s)	P260: Do not breathe dust/ fume/ gas/ mist/ vapours/ spray. P264: Wash skin thoroughly after handling. P280: Wear protective gloves/ eye protection/ face protection. P302 + P352: IF ON SKIN: Wash with plenty of water. P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P314: Get medical advice/ attention if you feel unwell.
Signal Word	Danger
RTECS	DG0875000
Storage class	6.1C Combustible, acute toxic Cat.3 / toxic compounds or compounds which causing chronic effects
WGK	WGK 1 slightly hazardous to water
Disposal	3 Relatively unreactive organic reagents should be collected in container A. If halogenated, they should be collected in container B. For solid residues use container C.

Safety Information
Categories of danger	harmful, irritant

Storage and Shipping Information
Storage	Store at +15°C to +25°C.

Transport Information
Declaration (railroad and road) ADR, RID	Kein Gefahrgut
Declaration (transport by air) IATA-DGR	No Dangerous Good
Declaration (transport by sea) IMDG-Code	No Dangerous Good

Specifications
Assay (acidimetric)	99.5 - 100.5 %
Assay (acidimetric, calc. on anhydrous substance)	99.5 - 100.5 %
Identity	conforms
Appearance of solution (5 %; ethanol 96 %)	passes test
pH-value (saturated solution)	2.5 - 3.5
Solidification point (lower value)	≥ 121 °C
Solidification point (upper value)	≤ 123 °C
Sulfate (SO₄)	≤ 0.02 %
As (Arsenic)	≤ 1 ppm
Cd (Cadmium)	≤ 10 ppm
Cr (Chromium)*	≤ 2.5 ppm
Cu (Copper)*	≤ 10 ppm
Hg (Mercury)	≤ 1 ppm
Mn (Manganese)*	≤ 25 ppm
Ni (Nickel)*	≤ 2 ppm
Pb (Lead)	≤ 2 ppm
Zn (Zinc)*	≤ 10 ppm
Halogenated compounds (as Cl)	≤ 0.01 %
Toluene (HS-GC)	≤ 890 ppm
Other residual solvents (ICH Q3C)	excluded by the production prozess
Oxidizable matter (Ph Eur)	passes test
Oxidizable matter (USP)	passes test
Readily carbonisable substance	passes test
Water	≤ 0.5 %
Sulfated ash	≤ 0.05 %
Elemental impurity specifications have been set considering ICH Q3D (Guideline for Elemental impurities). Class 1-3 elements are not likely to be present above the ICH Q3D option 1 limit, unless specified and indicated (*). Conforms to the purity criteria on food additives according to the current European Commission Regulation.
Corresponds to Ph Eur, BP, USP, E 210

Bu ürüne ilk yorumu siz yapın!

Benzoic Acid Powder ph eur,bp,usp,e 210 25 Kg (Benzoik Asit Tozu) CAS: 65-85-0